FLEX FIRE

Our hottest, most effective cleaning rinse ever. FLEX FIRE 6 # POWDER extraction rinse is a high pH rinsing solution designed specifically for exceptionally soiled commercial carpet when all others have failed. Combine with Flex Powder with Citrus Solv to remove traffic lanes previously considered uncleanable.

Available Sizes ▪ 6 lb. jar

Item # BP-CC225A
MFR # 1627-4983
MFR Legacy # CC225A
AKA # B07BTJWKYS,

Specifications

Form: Powder
pH: 11.3-11.5
Dilution Ratio: 1 oz./5 gal

Features

DISSOLVES QUICKLY – Flex FIRE rinse will dissolve quickly, creating a crystal-clear cleaning solution.
LOW COST – concentrated powder means you use less and save money.
EQUIPMENT SAFE – has special additives that help prevent corrosion and buildup in the extractor or truckmount.
HIGH CLEANING POWER – Surpasses all other extraction agents due to its aggressive alkalinity & high percentage surfactant blend.

SDS US English
Label
Spec Sheet

DIRECTIONS:
Use as the primary cleaning agent, or as a rinse agent, in the extraction process for heavily soiled commercial carpets. It’s highly recommended that a water softener be used for best performance results and to prevent precipitation caused by high heat truckmounts and hard water. FLEX FIRE 6 # Powder uses special rinse agents that perform best in warm water, temperatures above boiling will cause product separation. When water softener is not used, reduce heat to below 200 degrees.

For truckmount concentrate: Add 1 to 2 cups of Flex FIRE rinse to five gallons of cold or warm water. Mix thoroughly until dissolved. Systems metered on low settings, or for excessively soiled carpets, 3 cups may be used.
For portable equipment: Use 1 ounce of Flex FIRE rinse per 5 gallons hot water. For extra heavy soil use 2 ounces per five gallons of hot water.