SPEED SEAL – 5 GALLON PAIL
SPEED SEAL 5GAL Non-flammable, hard, clear undercoating for sealing all types of floors. Provides maximum protection for the floor and a perfect base coat for all types of floor finishes. An all acrylic, water emulsion sealer that protects floor surfaces from water, dirt and abrasive wear.
Available Sizes ▪ 5 gal. OR 1 gal.
- Item # HC3611-05
- MFR # 361105
- MFR Legacy # 3611
- AKA # 361105
- GTIN: 711978415320
- Form: Liquid
- pH: 8-9
- Dilution Ratio: RTU
- Produces durable seal
- Dries quickly for recoating
- Outperforms other sealers
- For use in high traffic area
- Fast drying, less waiting time
- Tough wear surface, long lasting protection
Apply SPEED SEAL 5GAL full strength by mopping over freshly stripped and rinsed floor. It is important floors rinsed thoroughly with water to remove any stripper residue, otherwise the stripper residue will attack the sealer and the subsequent floor finishes will look hazy in some areas.
A modern combination of acrylic copolymers metal cross linked to seal the resilient floor tiles in order to accept the multiple coats of floor finish. It is fast laying, quick drying and acts as primer for floor finishes. This floor finish contains cross metal linked copolymers in an opaque emulsion.
Recommended Use – Floor and Tile Sealer.
Uses advised against – No information available
OSHA Regulatory Status
This chemical is not considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.122)