LINX – 5 GALLON PAIL

LINX (5 GAL) A premium urethane fortified floor finish ideal for grocery stores, convenience stores and retail shops. Exceeds industry standards for durability, shine, and bounce back beauty. Dries to brilliant gloss and maintains easily with spray buffing or high speed burnishing. Apply product in thin coats.

Available Sizes ▪  5 gal. OR 1 gal. 

• Item # HC3500-05
• MFR # 350005
• MFR Legacy # 3500
• AKA # 350005EA
• GTIN: 711978412503

Specifications

• Form: Liquid
• pH: 8
• Dilution Ratio: RTU
• Coverage: 2000 Sq. Ft / Gallon

Features:

• 22% Solids
• Clear, non-yellowing formula
• Urethane Fortified
• Concentrated
• Low or high speed buffing
• Non-corrosive, nontoxic
• Resists scuffing and harsh detergents

Janitorial

Manufacturer Info

• SDS US English
• Tech Sheet

Directions:

Clean floor surface with a neutral detergent. If a stripper or alkaline detergent is used, rinse with clean water containing a neutralizer to insure proper coating and wear properties. Apply LINX FLOOR FINISH with an applicator or quality string mop generously without puddling to insure adequate protection and easy maintenance. For best results apply two or three coats, allowing polish to dry between coats (about 30 minutes depending on ventilation, humidity and temperature).

Porous surfaces should be sealed with an appropriate sealer or an extra coat of this finish. Maintain floor by daily sweeping or dust mopping. When necessary, damp mop with a mild detergent. Recoat as desired. Spray buff only with a high-speed system compatible with the finish, to insure recoat ability and performance. Strip only when necessary, using a recommended stripper. Since build up is seldom a problem in busy areas recoat traffic lanes to insure uniform protection and beauty.

Description: 

is a water-based urethane fortified floor finish, designed to beautify and protect resilient and non-resilient floors. LINX (5 GAL) was designed to be used in a high speed maintenance program. Excellent depth of gloss, outstanding leveling, and ease of application will make this your go to floor finish. Slip resistance meets or exceeds (ASTM D 2047-93) James Machine 0.5 minimum.