Truckmount Descaler has been chemically formulated to extend the life of carpet cleaning and other types of industrial equipment. With regular use of this product, users will see an overwhelming improvement in the operation of their equipment. Truckmount Descaler effectively removes lime film, calcium carbonate, magnesium carbonate, iron stains, and scale from heat exchangers, piping and lines of common industrial equipment used in today’s carpet cleaning industry.
Available Sizes ▪ 1 gal. / 3.8 L bottles
- Item # HC3700-04
- MFR # 370204
- MFR Legacy # 3702
- GTIN: 711978411940
- Form: Liquid
- pH: 1-2
- Dilution Ratio: RTU
- Effectively removes scale buildup
- Improves performance of equipment
- Cleans stainless steel, brass, and aluminum
- Simple application procedure
Adjust output temperature to approximately 120f and turn metering valve to highest mixture. Remove chemical pick up tube from detergent container and allow any remaining detergent to drain from tube. Place pick up tube into descaler container. Start machine to allow descaler to run through system until the blue color is seen at the other end of solution hose. Turn off equipment and allow sitting for 5‐ 10 minutes. Restart equipment. Replace descaler container with a container of clean water and repeat procedure. Replace detergent feeder container.
Truckmount Descaler is an acid based product; therefore, stainless steel, brass, and aluminum can be cleaned effectively with its use. Also with the use of this product, water heating and flow is greatly improved.