For those that want to revolutionize how their spraying is done, the HYDRO-FORCE REVOLUTION takes efficiency to a new level by allowing cleaners to adjust dilution ratios on the fly. Gross traffic lanes? No problem! Blast away dirty spots with the turn of a knob. Avoid over wetting and cut your spray time in half! Quickly apply presprays, deodorizers, tile and grout cleaning solutions, sanitizers, protectors and more.
- NEW, patent-pending container design makes the HYDRO-FORCE REVOLUTION sprayer the most convenient sprayer on the market.
- Large side-fill port refill without removing the injector assembly
- Wand holder to keep your wand off your customer’s floor
- Recessed handle no more annoying velcro straps
- Operating pressure range of 100-1,000 PSI*
- Eliminates annoying mixing required by pump up sprayers
- Adjust dilution ratios on the fly – don’t mess with metering tips!
- High-quality quick connects allow your gun to swivel and permits quick removal
- 5 qt. transparent container w/qt. measurement markings
- Quick connects for swiveling and quick removal
- Spray gun rated at 2600 PSI and 7 GPM
- Knob-adjustable dilution ratios
- Chemically-resistant seals
- 18″ stainless steel wand
- Rotomolded container
- Tethered cap
PLEASE CALL 1-800-334-5747 First For Backorders
Hydro-Force Injection Sprayer eliminates the hassles of measuring and mixing. We recommend you keep an extra 5-quart container or two on your truck to make sure you never run out and to facilitate quick changes of your chemical containers. Remember that Hydro-Force Injection Sprayers automatically mixes at a 1 to 8 ratio. If your 5-quart container is full then that is the same as holding an 11-gallon pump sprayer of regular, ready to use pre-spray. We have found that Hydro-Force Injection Sprayers offer better penetration and overall coverage than most other sprayers. It is therefore possible to pre-spray your jobs up to 45 minutes before you reach that area to be cleaned.